Light |
Light |
Light |
|
Laser Type (Welding mode) | Air-Cooled Ytterbium Continuous Wave 1070 nm Fiber Laser | ||
Laser Output (Welding mode) | 1500 W Average Power, with 2500 W Peak Power Class 1 Red Guide Beam | ||
Laser Output (Cleaning mode) | - | 2500 W Peak Power Pulse frequency up to 50 kHz Pulse duty Cycle up to 20% | |
Umbilical Cable | Utilities Bundle from Base Unit to Head including: Fiber Laser Delivery, Process Gas, Process Head Control Signals and Safety Interlock Circuits - Length: 5 m (16 ft) optional 10 m (32 ft) | ||
Cooling | Air Cooled – No External Chiller Required | ||
Weld Head | Handheld Wobble Welding Head Collimating Length 40 mm, Focus Length 120; Spot size 150μm Incorporating Safety Control Sensors and Laser-on Indicator User-changeable nozzles for planar, internal corner, and external corner welds | Handheld Wobble Welding Head Collimating Length 50 mm, Focus Length 120; Spot size 60 μm Incorporating Safety Control Sensors and Laser-on Indicator User-changeable nozzles for planar, internal corner, and external corner welds | |
Weld Head Cleaning Nozzles | - | Set of three nozzles for wide-angle scanning | |
Spot Size | 150 μm | 60 μm | |
Wobble Length | Adjustable up to 5 mm | ||
Cleaning Scan Length | - | Adjustable up to 15 mm | |
Process Gas | Argon, Nitrogen, Argon + CO2 mix For LHW-1500-5 Meter: Working Pressure 69-138 kPa, (10-20 psi) For LHW-1500-10 Meter: Working Pressure 103-207 kPa, (15-30 psi) | ||
User Interface | Front Panel Controls of Laser Power, Mode, Wobble Length and Wobble Frequency: (Ro-tary knobs with digital display). Laser On/Off key Switch, E-Stop Button. - Status Indicator Lights | ||
Computer Connection | Ethernet Connection to Web Page Interface Allowing Viewing/Adjustment of Process Mode Settings and System Status and Alarm Signal | ||
Safety | Class 4 Laser Device. Customer responsible for standard ANSI Z136.1 safety precautions. System features include Key for laser ON/Off, 2-step laser operation trigger (Enable and Fire), Part-head contact safety circuit, Facility door interlock circuit | ||
Operating Environment | Storage temperature -20 to 60 °C. Operating range +5 to 35 °C | ||
Ease of Aluminum Weld | Moderate | Easy | |
Single-Side, Single Pass Material Weld Capability | Stainless steel, mild steel, galvanized steel, aluminum up to 4 mm, copper up to 1 mm | Stainless steel, mild steel, galvanized steel, aluminum up to 6.35 mm, copper up to 2 mm | |
Facilities Requirements | Electrical: 220 V, 1 Ph, 50/60 Hz, < 30 Amp | ||
Weld Base Unit (W x D x H) | 316 x 641 x 534 mm (12.4 x 25.2 x 21 in) | ||
Weld Module Weight | 53 kg, (118 lbs) | ||
Accessories | Safety Glasses, Power Connecting Plug, Ethernet Cable |